免费咨询热线:400-9611-220
您现在的位置:首页产品展示手动手动粗铝丝压焊机 > CWS3200粗铝丝压焊机 引线键合机 超声波铝丝焊线机
  • 产品名称: CWS3200粗铝丝压焊机 引线键合机 超声波铝丝焊线机
  • 产品编号: CWS3200

CWS3200型超声波粗铝丝压焊机可应用于汽车电子、IGBT模块、大、中功率三极管、场效应管、大电流快恢复二极管、肖特基二极管、可控硅及功率模块等半导体功率器件的内引线焊接。
焊头的Y、Z方向运动均采用由单片机控制的步进电机驱动,精密导轨传动,动作灵活,定位准确, 速度快。超声功率、时间、压力、弧度、二焊尾丝、瞄准点高度、跨度、切刀力、照明灯等各种参数的调整均置于面板上用按键或者旋钮调节,方便准确,并且通过LCD实时显示。焊接压力采用自动控制,超声功率强劲富足,使焊接质量稳定可靠。并设有同一平面高度可焊1~6个焊点功能,使得在焊接面积较大的功率器件时,大大降低了焊点电阻,提高了可靠性。同时可记忆四条线的跨度、弧度、瞄准点等数据,提高了操作效率。


 

Applications and Features:
The CWS3200 Ultrasonic wire aluminum press welder can be used in the inner lead bonding of semiconductor power device, such as automotive electronics, IGBT module, high and medium power triode, feld-effect tube,, high power fast recovery diode, schottky diode, silicon controlled rectifier and power module.

The XY direction travel of welding head is driven by single chip controlling step motor and transferred by precision guide. All parameters can be tweaked with buttons and knobs on the panel, LCD will show it simultaneously. Welding pressure is automatic and ultrasonic power is strong. This machine can weld from 1 to 6 points at the same surface height. The dates of span, radian and aiming point can also be kept in machine.

试用电源:220VAC±10%,50Hz、可靠接地
可焊铝线线径:250~500um(10~20mil)
可焊铝带宽度:1mm、1.5mm、2mm(40mil、60mil、80mil)
超声功率:0~24W
焊接时间:10~500ms
焊接压力:250~3000g
一焊至二焊最大自动跨度:0~18mm
每条线可连续焊接焊点数:2~12
同一平面高度可连续焊接焊点数:1~6
可循环焊接不同高跨度的线数:1~4
显微镜:15倍、30倍
照明灯:亮度可调
工作台移动范围: ¢25mm
外形尺寸:620×610×620mm
重量:约50Kg
 
Main technical specifications
Power supply: 220VAC±10%,50Hz, reliably be grounded
Aluminium Wire Size: 250~500μm(10~20mil)
Aluminium RibbonSsize: 1mm, 1.5mm, 2mm(40mil, 60mil, 80mil)
Ultrasonic Power: 0~24W
Bond Time: 10~500ms
Bond Force: 250~3000g
Automatic Span from first to secend weld : 0~18mm
Continuous welding Points of one Line: 2~12
Continuous welding Points of one Surface Height: 1~ 6
multiple 1oop bonbing with different loop length and height:1~ 4loop
Weight: 50Kg
Dimensions: 620×610×620,long,wide, high
 

CWS3200型超声波粗铝丝压焊机可应用于汽车电子、IGBT模块、大、中功率三极管、场效应管、大电流快恢复二极管、肖特基二极管、可控硅及功率模块等半导体功率器件的内引线焊接。
 

The CWS3200 Ultrasonic wire aluminum press welder can be used in the inner lead bonding of semiconductor power device, such as automotive electronics, IGBT module, high and medium power triode, feld-effect tube,, high power fast recovery diode, schottky diode, silicon controlled rectifier and power module.

关键词:

下载附件:

博评网